New Pattern and Kits: Comet Trails Set

I've finished my next beading pattern, the Comet Trails Lariat and Earrings Set!

Beaded Beads with 2-Hole Crescents

I received a few packages of 2-hole crescent beads and 2-hole bar beads as part of Starman's Trendsetter program. After playing with them for a while I gravitated towards incorporating them into beaded beads, and I experimented with using them in geometric beaded bead embellishments. I couldn't decide whether to stick with bars or crescents for these embellishments, so I ended up using both for two different sets of spiky beaded beads. A lariat proved to be the ideal format to show off both versions.

Like the 2-hole triangles, the crescent beads have an "up" side and a down side that influences how they will orient themselves in the finished piece. I experimented with both orientations, but in this design the crescents preferred an outward orientation that gives the beaded bead a spiky look.

A Long Hubble Stitch Rope

I have a confession... Until I wove this piece, I didn't think I'd get into Hubble Stitch. Developed by Melanie de Miguel, this lacy, open weave is a cousin of right-angle weave and is reminiscent of a three-bead picot. I'd seen several lovely examples of this stitch from not only Melanie but also from Cynthia and Marcia, and I'd even made a few basic samples using the stitch, but I didn't initially see how it could be incorporated into any of my designs.

However, I noticed that the triangle shape formed by three-up Hubble looked like the seed bead embellishment in these beaded beads, so I set out to replicate that embellishment in a rope using Hubble stitch. The result is an extended variation, and by the definitions shown in Let's Hubble, it's an offset, four-up, tubular Hubble rope with periodic horizontal spaced out 2-hole beads. I like how this rope is light and lacy, but most of all how well it complements the beaded beads.

Matching Earrings

A pair of the smaller beaded beads make quick and easy matching earrings.

Three Colorways

Starman is continuously developing new colors and finishes for their beads, and it's quite fun to explore different colorways with this design.

The beading pattern for the Comet Trails Set includes complete written instructions on how to weave each component of the lariat, how to attach the components together, and how to weave the matching earrings. The pattern also includes a few images of the prototype pieces of beadwork that led to this design. Like the lariat, this pattern is on the long side; it's in the PDF format and clocks in at 30 pages and 117 full-color illustrations and photographs. I classify this pattern as intermediate, and it's most appropriate for beaders who have previous experience with beaded beads and who would like to learn a new way of creating them with 2-hole beads. Knowledge of Hubble Stitch is a plus but it isn't required to follow this pattern.

Kits for this design are available in three different colorways and make the completed lariat measuring up to 34" long, along with a pair of matching earrings. Each kit contains all the beads and findings needed to complete the project.

Thanks for looking!

Prism Blossoms Pendant for the Spring

The other day I wove a new Prism Blossoms Pendant to celebrate the first day of spring. I used some new colorful metallic Dragon Scale beads that I picked up from Beki at Out on a Whim when they were exhibiting in San Diego.

A photo posted by Cindy (@beadorigami) on Mar 18, 2016 at 12:56pm PDT

(By the way, I'm on Instagram, where I like to post candid shots of what's on my bead board, and also cats).

I wanted to pair these beads with the new opaque Duracoat seed beads from Miyuki. I had been anticipating the release of these new beads ever since they showed off samples at the 2015 Bead & Button Show. Fortunately they shipped just in time for spring and they should be arriving at your favorite bead retailer soon.

A photo posted by Cindy (@beadorigami) on Jun 7, 2015 at 12:16pm PDT

I'm quite happy with how the pendant turned out!

Kits for this colorway are available at www.beadorigami.com, and contain all the materials needed to weave the finished pendant.

Thanks for looking!

New Pattern and Kits: Star Fragment Pendants

I finished my latest beading pattern, the Star Fragment Pendants.

Coiled Cubic Right-Angle Weave

Over the past several months I've been quietly working on this new variation on CRAW. It's an idea that originated from several places; most importantly it builds on Gwen Fisher's Twisted CRAW technique, though I recently dived through my old photos and prototypes and found related bits of beadwork dating back to 2008 (!). I started exploring this concept in earnest after taking a four-day class with David Chatt, where he encouraged me to explore versions of RAW and CRAW that twist and spiral.

That was last January, and since then I've beaded a whole box of beadwork ranging from promising experimental samples to quite ugly (but educational) failures to satisfying pieces of finished jewelry. It's been quite an artist's journey for me, full of both joy and disappointment, confusion and gradual understanding, and a whole lot of hard work. I'm looking forward to telling this story further as I present more of this beadwork, but for now I'll focus on the first design out of that box.

CRAW That Twists and Coils

The Star Fragment Pendants feature this CRAW variation that not only twists in the style of Gwen Fisher's technique, but also coils like an old-fashioned telephone cord. While others have explored these ideas with embellishment and bead size strategies, the twist of this version is generated by the specific thread path of the stitch. Like CRAW, coiled CRAW can be embellished and made into components, and the same ideas also apply to prismatic right-angle weave.

The beading pattern for this design describes how to make two different sizes of Star Fragment Pendants from embellished coiled CRAW components. In the pattern I explain the similarities and differences between CRAW, twisted CRAW, and coiled CRAW, and I introduce terminology to describe the unique features of the stitch. The pattern is in the PDF format and clocks in at 22 pages and 85 full-color illustrations and photographs. I classify this pattern as advanced and it's most appropriate for experienced beaders who have mastered CRAW and are ready for the challenge of learning this new variation. Though to be honest, I find the action of stitching twisted and coiled CRAW easier than traditional CRAW, but it's difficult to wrap one's brain around the subtle intricacies of coiled CRAW structures if you haven't already mastered CRAW.

Small and Large Star-Shaped Pendants

This design uses a collection of traditional beads; Japanese seed beads, round beads, fire polish beads, and bicone crystals. The petite pendant features one component, while the large one features two components in two different sizes. The components stack and join in an offset way that's a little tricky to assemble, but I like how this substantial component has such dimension and texture, and I'm quite happy that it also has negative space in the center (a concept that I frequently struggle with).

Kits for this design are available in three different colorways and include all the beads needed to make both pendants, though at the time of this writing the bronze colorway is currently sold out (I'm in the process of re-stocking this colorway, so check back soon for updated availability). Both pendants look lovely strung either separately or together on a silk ribbon.

Thanks for looking!

Garden Jewel Necklace in Beadwork Magazine

My third Designer of the Year project for Beadwork Magazine is now available in the June/July 2015 issue.

The Garden Jewel Necklace features a great big Swarovski crystal bezeled with a collection of Miyuki Tila beads, drop beads, and round Japanese seed beads. A beaded spiral rope matches the focal pendant, and several beaded beads reminiscent of the Dewdrop beaded bead design string onto the rope for added texture.

The beaded beads will just fit over the spiral rope, yet they will stay in place once strung, so they can be positioned at different points on the rope for several different looks. In this purple and green version they sit close to the pendant:

And in this silvery purple version they are distributed more evenly throughout the rope:

A limited number of kits for this project are available on my website at beadorigami.com. The pattern for this design is available in the June/July 2015 issue of Beadwork Magazine. Please note that I'll soon be traveling to the 2015 Bead & Button Show, and the last day to order kits for shipment before the show is June 1. Any kits ordered after June 1 will ship on June 9.

Thanks for looking!

Bitten by the Silver Bug

I've been bitten by the silver bug...

It started with a pear-shaped Swarovski silver patina crystal that had been sitting around my studio for the past several months. I incorporated it into a Prism Blossoms Pendant, and complemented it with silver half Tila, bugle, triangle, and seed beads.

I used a crystal clear rivoli for the center to keep the emphasis on the silver beads and the flowers. To keep the focus on the silver portions of this piece, I also used a relatively simple complementary color palette of oranges and blues for the Dragon Scale bead flowers.

For my next silver piece, I turned to the Annular O Necklace. This colorway features silver patina rivoli crystals, but these shiny crystals are paired with more muted pewter seed beads. A touch of purple adds color to the necklace.

Finally, I collected a bunch of Tila, half Tila, bugle, and seed beads as well as crystal AB crystals for a Half Tila Technocluster beaded bead. I left the half Tilas clear in an attempt to blend them in with the crystals, and I think I was successful on this point, however the resulting beaded bead does not show the sharp lines that some of the other colorways of this design.

I also experimented with reflective surfaces for this photo, but it didn't quite turn out the way that I would have liked. So the photography of this piece remains a work-in-progress.

Beading patterns for all three of these designs are available at beadorigami.com, and kits for these colorways and more are available as well.

Which do you prefer? Silver, gold, bronze, or another color entirely? Drop me a line in the comments :)

Thanks for looking!

Year-End Kit Clearance Sale

I'm having a sale on several beading kits available at beadorigami.com to make way for new exciting designs in 2015! Additionally, several of the beading patterns associated with these kits are on sale as well. Here's a selection of the kits available during this special sale:

Check out the full list of discounted kits at www.beadorigami.com/kit_clearance.html. The sale discounts are applied automatically at checkout so no coupon code is needed. The sale ends on December 31, 2014.

Happy New Year!

New Pattern and Kits: Fairy Triangles Set

My newest beading pattern, the Fairy Triangles Set, is now available at beadorigami.com.

Triangle Components from Triangle Beads

Last week I blogged about making little beaded triangles out of triangle-shaped beads, and how they can be connected together to make bracelets or a large beaded bead. Here are several of the triangles that went into the large beaded bead above:

I liked making this beaded bead so much that I also made two smaller versions. Here's the medium-sized beaded bead, alongside a matching Fairy Triangles component:

This version also uses Tri-beads instead of O beads, just because I wanted to add extra triangles ;).

All three beaded beads are based on the geometries of the deltahedra; the group of 3D shapes made up entirely of equilateral triangles. The pattern for this design includes guidelines on how to join these components together to make all three of the above beaded beads, and these guidelines can be applied to the rest of the deltahedra as well.

An interesting note about this design is that it uses a different strategy than the one I usually use to make a geometric beaded bead; most of my beaded bead designs take an edge-skeleton and face-embellishment approach, as I discussed in my beaded bead webinar. The Fairy Triangles beaded beads, on the other hand, take a face-component and corner-join approach that's a little easier to tackle than my usual methods.

Petite, Quick Earrings

In addition to beaded beads and bracelets, these components also make a quick and easy pair of earrings:

A Solo Pendant

The large beaded bead can also be strung on a silk ribbon for a stunning solo pendant:

Beading kits for this design are available in four colorways, and include all the beads needed to make and connect 30 components together. Many different jewelry combinations can be made from this kit; it makes enough components for one large and one medium beaded bead, or three medium and one small beaded bead, or seven small beaded beads, and many other combinations are possible too. Additionally, you can combine these kits with your own findings to make earrings, bracelets, and necklaces.

New Pattern and Kit Pricing

Last month I made some big changes to the Bead Origami kits page: Bead Origami kits are now "unbundled" from their patterns. The kits are now "à la carte" and still include the listed materials and all shipping costs, but the pattern must be purchased separately (all kit prices have been lowered accordingly, and some of my pattern prices are also slightly lower). 

Under this new pricing method, you can now purchase the pattern and then sort through the beads that you already have before purchasing a kit. Plus you can purchase kits for a specific design in two or more colorways without paying for the same pattern twice. If you wish to order both the pattern and the kit at the same time, simply add both items to your shopping cart before completing your purchase. Finally, if you already have a copy of one of my designs that has been published elsewhere (such as in a magazine) and you want to purchase a kit for that design, you can now do so without purchasing another copy of the pattern.

It's my hope that this method will offer additional purchasing flexibility to my customers, while making the logistics a little easier on my end. I'd be very interested to hear your feedback about this change!

Thanks for looking!

New Pattern and Kits: Half Tila Technocluster Set

I'm pleased to release my latest beading pattern, the Half Tila Technocluster Beaded Bead Set!

A Faceted Dodecahedron Beaded Bead

This beaded bead combines Miyuki Tila beads, Miyuki Half Tila beads, bugle beads, and Japanese seed beads with Swarovski rivoli crystals for a very sparkly, tactile, angular beaded bead. This design is woven using the circular netting stitch and a variation on right angle weave, all in the geometry of the dodecahedron, for a total of 12 pentagon-shaped sides with one crystal in the middle of each side.

The crystals sit close to the middle of the design, and I really like how the Half Tila beads reflect and extend the facets of the crystals outward. The angular shapes of the beads used in the Half Tila Technocluster give it the look of an advanced technological device, hence its name.

A Stunning Solo Pendant

The Half Tila Technocluster is self-supporting with no inner core bead, and can be strung through any pair of the triangular-shaped holes formed by the bugle beads. This beaded bead measures about 33 mm diameter, and stands on its own very well as a pendant. I've strung this one on a Diamond O Beaded Chain that I usually use for an O Stars Pendant (though, I think a Diamond O Chain woven with bugle beads would complement this beaded bead quite nicely too):

Matching Earrings for a Complete Set

A pair of matching earrings completes the Half Tila Technocluster Set. Here's the beaded bead in matte metallic patina, bright green, and lavender hues:

And here's the pair of matching earrings for this colorway:

The earrings are light and comfortable, and well-balanced so that the beaded component does not bend forward. Do you see how the earring takes the shape of one of the 12 pentagons from the beaded bead?

A Trio of Beading Patterns in One!

This is perhaps the most technically-challenging beaded bead I've designed, so I was initially wary of writing it up as a beading pattern. If you've previously mastered the Tila Garden Pendant, you're in great shape for tackling this beaded bead. 

If you're new to dodecahedron beaded beads, I really tried to bring my "A Game" when I wrote the pattern for this design. So, I started with the instructions for the matching earrings, which teach you how to use the Tila and Half Tila beads in layered, dimensional beadwork. Then, I include instructions for a basic dodecahedron beaded bead, woven with bugle beads and size 11° seed beads, for an easier introduction to the geometry of this design. Finally, I conclude with the instructions for the full Half Tila Technocluster beaded bead, which combines both lessons together for this stunning statement beaded bead. This is one of my longer patterns, and clocks in at 28 pages and 90 full-color photos and illustrations.  

Four Kits!

Beading kits for this design are available in the four colorways shown above, and include all the beads and findings needed to make the main Half Tila Technocluster beaded bead, the matching earrings, and at least one basic dodecahedron beaded bead.

Thanks for looking!

New Pattern and Kits: Water Lily Windows Bracelet and Earrings Set

My latest beading pattern is done! Presenting the Water Lily Windows Bracelet and Earrings Set:

Floating Beaded Water Lilies

This pattern describes how to make three different shapes of Water Lily Windows components, featuring little beaded flowers woven from Rizo beads, floating in a frame of Tila, SuperDuo, and Japanese seed beads. In the pattern, I describe how to connect them together for a twisting bracelet, complete with a matching custom beaded clasp. The pattern also covers how to make two of these components into matching earrings, and how to attach pear-shaped Swarovski crystals, with an unusual method designed to make the crystals face forward.

Tila Bead Frames + Flowers

This pattern is part of a series where I've experimented with surrounding other beads with frames of Tila beads. I used a similar strategy to make the oval-shaped components in the Cosmic Windows Bracelet:

The components in the Water Lily Windows Bracelet are more angular, resulting in square, pentagon, and hexagon-shaped framed flowers. To create this bracelet, I could have connected several square or hexagon-shaped components together in a straight line, or I could have arranged a tiling pattern of pentagon-shaped components. Indeed, several different arrangements are possible!

In the end, I settled on a combination of pentagon- and hexagon-shaped components in a nonlinear arrangement, which resulted in a more unusual, but organic look to the finished bracelet. I also experimented with using two different colors of Rizo beads for the flowers, which you can see in the bracelet below:

Three Kits!

Kits for this design are available in the three colorways shown above, and include all the beads and findings needed to make the bracelet and the matching earrings. It's the perfect design for celebrating the coming springtime!

Thanks for looking!

New Pattern and Kits: O Stars Set

I finished my fourth O bead jewelry pattern, the O Stars Pendant and Earrings Set!

Seeing Stars!

This pattern describes how to weave three different six-pointed star components from Swarovski crystals, round and shaped Japanese seed beads, two-hole SuperDuo beads, and O beads. The pattern starts with the relatively straightforward small component (a close relative to the Lucky O Bracelet component), and gradually works up to the more complicated large O Star component. I've classified this pattern as advanced because each component is engineered to be self-supporting from many rounds of beadwork, and it uses different bead counts and shapes in each round, so it keeps you on your toes towards the end of the pattern. However, each step is described in my usual level of detail with several full-color illustrations and photographs, so intermediate students should be able to complete the small and medium components and then work up to the large component.

A Cascading Pendant

The cornerstone of this pattern is the O Stars Pendant, which features all three stars connected together. A beaded bail and a briolette crystal complete the pendant for a long, cascading design.

A Matching Beaded Chain

I liked the diamond chain with O beads that I used in the Annular O Necklace so much, so I also included instructions on how to make this beaded chain to match the O Stars pendant. It's a fast, easy design that makes a light, delicate chain, and it's not sewn into the pendant, so it can be used for other pendants too! I'll definitely be using it more in the future.

Matching Earrings

Finally, two small components pair with additional briolette crystals for a cute little pair of matching earrings, completing this 3-in-1 pattern set.

Four Kits!

Kits for this design come in the four colorways seen above, and include all the beads and findings needed to make the pendant, earrings, and a beaded chain up to 24 inches long. The components can also be incorporated into many other jewelry designs!

New Kits: Serotonin and Dopamine Beaded Molecules

Beading kits are now available for the Serotonin and Dopamine Beaded Molecules!

First up is a silvery colorway based on CPK colors, a standard coloring system used in the sciences to color-code each atom in a molecule. In this system, the carbon atoms are black, the oxygen atoms are red, and the nitrogen atoms are blue. I made these molecules a little more fancy by using hematite, AB, and luster finishes in the seed beads.

Next up is the orchid colorway, in soft lavender, tanzanite, and teal green. I created a necklace using five of these beaded molecules, which I've taken to wearing quite a lot lately!

Last up is a pink and gold colorway, using fancy gold-plated seed beads and pink and purple Duracoat Miyuki seed beads. I used nine beaded molecules to form a linked necklace in this colorway.

All three kits include enough beads to make a total of ten dopamine and serotonin beaded molecules. You can mix and match the types of molecules from this kit; you can make 10 dopamine molecules, 10 serotonin molecules, five of each, or anywhere in-between. The kit also includes jump rings and a clasp so that you can make a linked necklace like in the gold colorway above (crystals not included).

New Kit: Special Edition Heliotrope Tropical Dahlia Necklace

New kits are now available for the Heliotrope Tropical Dahlia Necklace:

I received so many compliments about this piece at the Bead & Button Show that I had to put it together as a kit. Unfortunately, after the show I learned that heliotrope Swarovski rivolis are a limited-edition crystal, and it took me a while to source more of them. Since I don't know if I'll be able to source them again, this will be a Special Edition kit.

Each kit contains all the beads needed to make the complete necklace, including Swarovski rivoli crystals, rizo beads, Czech teardrop beads, Japanese seed beads, large sterling silver jump rings, and a sterling silver clasp (please note that you will need to supply your own Fireline thread to complete the necklace). The necklace is choker-length, however you can add to its length with a couple more jump rings or a short bit of chain.